XPENG L03 RWD Standard Range Charging Guide: Time, Speed, Power
Price: $41,900
Available since 2026
Key EV Specs
58.3kWh
Battery Size (capacity)
445 km
Range (WLTP)
126 Wh/km
Efficiency
7.5 s
Acceleration (0-100 km/hr)
11 kW AC / 193 kW DC
Charge Power (max)
XPENG L03 RWD Standard Range Charging Overview and Charging Specs
The XPENG L03 RWD Standard Range is equipped with a 58.3 kWh battery and supports both AC and DC charging. With the right setup, you can charge conveniently at home or use public charging stations for faster top-ups. This guide covers charging times, costs, plug types, and tips to maximise efficiency. The L03 RWD Standard Range uses a Type 2 plug for AC charging and a CCS connector for DC fast charging, both standard in Australia.
| Battery size (capacity) | 58.3 kWh |
| Battery Size (useable) | 56 kWh |
| Battery Chemistry | LFP |
| Charge Port Type | Type 2 |
| Charge Port Location | Right Side - Rear |
| Charge Power (max) | 11 kW |
| Charge Speed | 79 km/h |
| Charge Time (0-100%) | 7 hrs 12 mins |
XPENG L03 RWD Standard Range Charging Times and Speeds
The XPENG L03 RWD Standard Range has a charging limit of 11 kW AC. This means that a three-phase 22kW AC charger will only supply power at 11 kW AC. If you are using a 7.2 kW AC charger, power will be limited to 7.2 kW AC. The table below provides charging times across different charger types.
Use our EV charging calculator if you want to customise your charge level and speed.
Charging Station Comparison
| Charger Type | Power Output (Average) | 0–100% Time | 10–80% Time | Speed |
|---|---|---|---|---|
| Home AC (7kW) | 7 kW | 8.4 hr | - | 56 km/h |
| Public AC (22kW) | 11 kW | 5.4 hr | - | 87 km/h |
| DC Fast (50kW) | 50 kW | - | 50 min | 397 km/h |
| DC Fast (150kW) | 118 kW | - | 21 min | 937 km/h |
| Ultra-Fast DC (350kW) | 118 kW | - | 21 min | 937 km/h |
XPENG L03 RWD Standard Range Charging Costs & Energy Use
The cost of charging a XPENG L03 RWD Standard Range will depend on where it is being charged. The costs of charging from home versus charging as a fast public charging station vary significantly.
The cost of fully charging a XPENG L03 RWD Standard Range on a typical home flat energy tariff of $0.35/kWh is $20.40.
The cost of fully charging the XPENG L03 RWD Standard Range at a fast public station, where rates as high as $0.7/kWh will be $40.81.
Use our EV charging calculator to get a personalised estimate of the charging costs for a XPENG L03 RWD Standard Range
CCS CompatibleXPENG L03 RWD Standard Range Fast Charging & Tesla Supercharger Compatibility
The XPENG L03 RWD Standard Range can charge from 10–80% in approximately 20 minutes on a high-power DC charger.
While most Tesla Superchargers in Australia now support non-Tesla EVs such as the XPENG L03 RWD Standard Range via the CCS2 standard, always check the Tesla app for station compatibility.
Charging Specifications:
Usable Battery Capacity:
58.3 kWh
Fast Charge Power (max):
193 kW
Fast Charge Power (avg):
118 kW
Max Fast Charging Speed:
1380 km/h
Charge Port:
Type 2
Port Location:
Right Side (Rear)
XPENG L03 RWD Standard Range Recommended Charge Level
The XPENG L03 RWD Standard Range uses an LFP battery. The typical recommended charge limit is 100% for daily use.
The key advantage of LFP is the freedom to fully charge the pack to 100% every time with substantially less degradation concerns compared to other chemistries.
Check your owners manual for specific recommendations for the XPENG L03 RWD Standard Range.
XPENG L03 RWD Standard Range Bidirectional Charging (V2G/V2H/V2L)
The XPENG L03 RWD Standard Range currently supports bidirectional charging features such as Vehicle-to-Load (V2L).
| Feature | Supported | Max Power Output |
|---|---|---|
| Vehicle-to-Grid (V2G) | No | - |
| Vehicle-to-Home (V2H) | No | - |
| Vehicle-to-Load (V2L) | Yes | 6 kW |