XPENG G6 Standard Range Charging Guide: Time, Speed, Power
Price: $54,800
Available since 2024
Key EV Specs
66kWh
Battery Size (capacity)
435 km
Range (WLTP)
145 Wh/km
Efficiency
6.6 s
Acceleration (0-100 km/hr)
11 kW AC / 215 kW DC
Charge Power (max)
XPENG G6 Standard Range Charging Overview and Charging Specs
The XPENG G6 Standard Range is equipped with a 66 kWh battery and supports both AC and DC charging. With the right setup, you can charge conveniently at home or use public charging stations for faster top-ups. This guide covers charging times, costs, plug types, and tips to maximise efficiency. The G6 Standard Range uses a Type 2 plug for AC charging and a CCS connector for DC fast charging, both standard in Australia.
| Battery size (capacity) | 66 kWh |
| Battery Size (useable) | 63 kWh |
| Battery Chemistry | LFP |
| Charge Port Type | Type 2 |
| Charge Port Location | Left Side - Rear |
| Charge Power (max) | 11 kW |
| Charge Speed | 68 km/h |
| Charge Time (0-100%) | 6 hrs 42 mins |
XPENG G6 Standard Range Charging Times and Speeds
The XPENG G6 Standard Range has a charging limit of 11 kW AC. This means that a three-phase 22kW AC charger will only supply power at 11 kW AC. If you are using a 7.2 kW AC charger, power will be limited to 7.2 kW AC. The table below provides charging times across different charger types.
Use our EV charging calculator if you want to customise your charge level and speed.
Charging Station Comparison
| Charger Type | Power Output (Average) | 0–100% Time | 10–80% Time | Speed |
|---|---|---|---|---|
| Home AC (7kW) | 7 kW | 9.9 hr | - | 48 km/h |
| Public AC (22kW) | 11 kW | 6.3 hr | - | 76 km/h |
| DC Fast (50kW) | 50 kW | - | 58 min | 345 km/h |
| DC Fast (150kW) | 150 kW | - | 19 min | 1034 km/h |
| Ultra-Fast DC (350kW) | 350 kW | - | 8 min | 2414 km/h |
XPENG G6 Standard Range Charging Costs & Energy Use
The cost of charging a XPENG G6 Standard Range will depend on where it is being charged. The costs of charging from home versus charging as a fast public charging station vary significantly.
The cost of fully charging a XPENG G6 Standard Range on a typical home flat energy tariff of $0.35/kWh is $23.10.
The cost of fully charging the XPENG G6 Standard Range at a fast public station, where rates as high as $0.7/kWh will be $46.20.
Use our EV charging calculator to get a personalised estimate of the charging costs for a XPENG G6 Standard Range
CCS CompatibleWhile most Tesla Superchargers in Australia now support non-Tesla EVs such as the XPENG G6 Standard Range via the CCS2 standard, always check the Tesla app for station compatibility.
XPENG G6 Standard Range Fast Charging & Tesla Supercharger Compatibility
The XPENG G6 Standard Range can charge from 10–80% in approximately 20 minutes on a high-power DC charger.
While most Tesla Superchargers in Australia now support non-Tesla EVs such as the XPENG G6 Standard Range via the CCS2 standard, always check the Tesla app for station compatibility.
Charging Specifications:
Usable Battery Capacity:
66 kWh
Fast Charge Power (max):
215 kW
Fast Charge Power (avg):
132 kW
Max Fast Charging Speed:
868 km/h
Charge Port:
Type 2
Port Location:
Left Side (Rear)
XPENG G6 Standard Range Recommended Charge Level
The XPENG G6 Standard Range uses an LFP battery. The typical recommended charge limit is 100% for daily use.
The key advantage of LFP is the freedom to fully charge the pack to 100% every time with substantially less degradation concerns compared to other chemistries.
Check your owners manual for specific recommendations for the XPENG G6 Standard Range.
XPENG G6 Standard Range Bidirectional Charging (V2G/V2H/V2L)
The XPENG G6 Standard Range currently supports bidirectional charging features such as Vehicle-to-Load (V2L).
| Feature | Supported | Max Power Output |
|---|---|---|
| Vehicle-to-Grid (V2G) | No | - |
| Vehicle-to-Home (V2H) | No | - |
| Vehicle-to-Load (V2L) | Yes | 3.3 kW |