Smart #1 Pro+ Charging Guide: Time, Speed, Power
Price: $54,900
Available since 2024
Key EV Specs
66kWh
Battery Size (capacity)
420 km
Range (WLTP)
148 Wh/km
Efficiency
6.7 s
Acceleration (0-100 km/hr)
7.4 kW AC / 150 kW DC
Charge Power (max)
Smart #1 Pro+ Charging Overview and Charging Specs
The Smart #1 Pro+ is equipped with a 66 kWh battery and supports both AC and DC charging. With the right setup, you can charge conveniently at home or use public charging stations for faster top-ups. This guide covers charging times, costs, plug types, and tips to maximise efficiency. The #1 Pro+ uses a Type 2 plug for AC charging and a CCS connector for DC fast charging, both standard in Australia.
| Battery size (capacity) | 66 kWh |
| Battery Size (useable) | 62 kWh |
| Battery Chemistry | NMC |
| Charge Port Type | Type 2 |
| Charge Port Location | Left Side - Rear |
| Charge Power (max) | 7.4 kW |
| Charge Speed | 45 km/h |
| Charge Time (0-100%) | 9 hrs 54 mins |
Smart #1 Pro+ Charging Times and Speeds
The Smart #1 Pro+ has a charging limit of 7.4 kW AC. This means that a three-phase 22kW AC charger will only supply power at 7.4 kW AC. If you are using a 7.2 kW AC charger, power will be limited to 7.2 kW AC. The table below provides charging times across different charger types.
Use our EV charging calculator if you want to customise your charge level and speed.
Charging Station Comparison
| Charger Type | Power Output (Average) | 0–100% Time | 10–80% Time | Speed |
|---|---|---|---|---|
| Home AC (7kW) | 7 kW | 9.3 hr | - | 47 km/h |
| Public AC (22kW) | 7.4 kW | 8.8 hr | - | 50 km/h |
| DC Fast (50kW) | 50 kW | - | 55 min | 338 km/h |
| DC Fast (150kW) | 93 kW | - | 29 min | 628 km/h |
| Ultra-Fast DC (350kW) | 93 kW | - | 29 min | 628 km/h |
Smart #1 Pro+ Charging Costs & Energy Use
The cost of charging a Smart #1 Pro+ will depend on where it is being charged. The costs of charging from home versus charging as a fast public charging station vary significantly.
The cost of fully charging a Smart #1 Pro+ on a typical home flat energy tariff of $0.35/kWh is $23.10.
The cost of fully charging the Smart #1 Pro+ at a fast public station, where rates as high as $0.7/kWh will be $46.20.
Use our EV charging calculator to get a personalised estimate of the charging costs for a Smart #1 Pro+
CCS CompatibleSmart #1 Pro+ Fast Charging & Tesla Supercharger Compatibility
The Smart #1 Pro+ can charge from 10–80% in approximately 28 minutes on a high-power DC charger.
While most Tesla Superchargers in Australia now support non-Tesla EVs such as the Smart #1 Pro+ via the CCS2 standard, always check the Tesla app for station compatibility.
Charging Specifications:
Usable Battery Capacity:
66 kWh
Fast Charge Power (max):
150 kW
Fast Charge Power (avg):
93 kW
Max Fast Charging Speed:
599 km/h
Charge Port:
Type 2
Port Location:
Left Side (Rear)
Smart #1 Pro+ Recommended Charge Level
The Smart #1 Pro+ uses an NMC battery. The typical recommended charge limit is 80% to 90% for daily use and only charge to 100% for longer trips.
The recommended charge limit for NMC batteries is due to higher degradation risk from a higher state of charge.
Check your owners manual for specific recommendations for the Smart #1 Pro+.
Smart #1 Pro+ Bidirectional Charging (V2G/V2H/V2L)
The Smart #1 Pro+ currently supports bidirectional charging features such as Vehicle-to-Load (V2L).
| Feature | Supported | Max Power Output |
|---|---|---|
| Vehicle-to-Grid (V2G) | No | - |
| Vehicle-to-Home (V2H) | No | - |
| Vehicle-to-Load (V2L) | Yes | 3.3 kW |