Kia PV5 Passenger Charging Guide: Time, Speed, Power
Price: $0
Available since 2026
Key EV Specs
71.2kWh
Battery Size (capacity)
397 km
Range (WLTP)
196 Wh/km
Efficiency
10.6 s
Acceleration (0-100 km/hr)
10.5 kW AC / 150 kW DC
Charge Power (max)
Kia PV5 Passenger Charging Overview and Charging Specs
The Kia PV5 Passenger is equipped with a 71.2 kWh battery and supports both AC and DC charging. With the right setup, you can charge conveniently at home or use public charging stations for faster top-ups. This guide covers charging times, costs, plug types, and tips to maximise efficiency. The PV5 Passenger uses a Type 2 plug for AC charging and a CCS connector for DC fast charging, both standard in Australia.
| Battery size (capacity) | 71.2 kWh |
| Battery Size (useable) | 67 kWh |
| Battery Chemistry | NMC |
| Charge Port Type | Type 2 |
| Charge Port Location | Front Center |
| Charge Power (max) | 10.5 kW |
| Charge Speed | - |
| Charge Time (0-100%) | 7 hrs 6 mins |
Kia PV5 Passenger Charging Times and Speeds
The Kia PV5 Passenger has a charging limit of 10.5 kW AC. This means that a three-phase 22kW AC charger will only supply power at 10.5 kW AC. If you are using a 7.2 kW AC charger, power will be limited to 7.2 kW AC. The table below provides charging times across different charger types.
Use our EV charging calculator if you want to customise your charge level and speed.
Charging Station Comparison
| Charger Type | Power Output (Average) | 0–100% Time | 10–80% Time | Speed |
|---|---|---|---|---|
| Home AC (7kW) | 7 kW | 10.1 hr | - | 36 km/h |
| Public AC (22kW) | 10.5 kW | 6.7 hr | - | 54 km/h |
| DC Fast (50kW) | 50 kW | - | 59 min | 255 km/h |
| DC Fast (150kW) | 72 kW | - | 41 min | 367 km/h |
| Ultra-Fast DC (350kW) | 72 kW | - | 41 min | 367 km/h |
Kia PV5 Passenger Charging Costs & Energy Use
The cost of charging a Kia PV5 Passenger will depend on where it is being charged. The costs of charging from home versus charging as a fast public charging station vary significantly.
The cost of fully charging a Kia PV5 Passenger on a typical home flat energy tariff of $0.35/kWh is $24.92.
The cost of fully charging the Kia PV5 Passenger at a fast public station, where rates as high as $0.7/kWh will be $49.84.
Use our EV charging calculator to get a personalised estimate of the charging costs for a Kia PV5 Passenger
CCS CompatibleKia PV5 Passenger Fast Charging & Tesla Supercharger Compatibility
The Kia PV5 Passenger can charge from 10–80% in approximately 39 minutes on a high-power DC charger.
While most Tesla Superchargers in Australia now support non-Tesla EVs such as the Kia PV5 Passenger via the CCS2 standard, always check the Tesla app for station compatibility.
Charging Specifications:
Usable Battery Capacity:
71.2 kWh
Fast Charge Power (max):
150 kW
Fast Charge Power (avg):
72 kW
Max Fast Charging Speed:
0 km/h
Charge Port:
Type 2
Port Location:
Front Center
Kia PV5 Passenger Recommended Charge Level
The Kia PV5 Passenger uses an NMC battery. The typical recommended charge limit is 80% to 90% for daily use and only charge to 100% for longer trips.
The recommended charge limit for NMC batteries is due to higher degradation risk from a higher state of charge.
Check your owners manual for specific recommendations for the Kia PV5 Passenger.
Kia PV5 Passenger Bidirectional Charging (V2G/V2H/V2L)
The Kia PV5 Passenger currently supports bidirectional charging features such as Vehicle-to-Load (V2L).
| Feature | Supported | Max Power Output |
|---|---|---|
| Vehicle-to-Grid (V2G) | No | - |
| Vehicle-to-Home (V2H) | No | - |
| Vehicle-to-Load (V2L) | Yes | 3.6 kW |