XPENG G6 AWD Performance Charging Guide: Time, Speed, Power
Price: $63,800
Available since 2026
Key EV Specs
80.8kWh
Battery Size (capacity)
510 km
Range (WLTP)
157 Wh/km
Efficiency
4.13 s
Acceleration (0-100 km/hr)
11 kW AC / 451 kW DC
Charge Power (max)
XPENG G6 AWD Performance Charging Overview and Charging Specs
The XPENG G6 AWD Performance is equipped with a 80.8 kWh battery and supports both AC and DC charging. With the right setup, you can charge conveniently at home or use public charging stations for faster top-ups. This guide covers charging times, costs, plug types, and tips to maximise efficiency. The G6 AWD Performance uses a Type 2 plug for AC charging and a CCS connector for DC fast charging, both standard in Australia.
| Battery size (capacity) | 80.8 kWh |
| Battery Size (useable) | 80 kWh |
| Battery Chemistry | LFP |
| Charge Port Type | Type 2 |
| Charge Port Location | Right Side - Rear |
| Charge Power (max) | 11 kW |
| Charge Speed | 63 km/h |
| Charge Time (0-100%) | 8 hrs 6 mins |
XPENG G6 AWD Performance Charging Times and Speeds
The XPENG G6 AWD Performance has a charging limit of 11 kW AC. This means that a three-phase 22kW AC charger will only supply power at 11 kW AC. If you are using a 7.2 kW AC charger, power will be limited to 7.2 kW AC. The table below provides charging times across different charger types.
Use our EV charging calculator if you want to customise your charge level and speed.
Charging Station Comparison
| Charger Type | Power Output (Average) | 0–100% Time | 10–80% Time | Speed |
|---|---|---|---|---|
| Home AC (7kW) | 7 kW | 12.0 hr | - | 45 km/h |
| Public AC (22kW) | 11 kW | 7.7 hr | - | 70 km/h |
| DC Fast (50kW) | 50 kW | - | 71 min | 318 km/h |
| DC Fast (150kW) | 150 kW | - | 24 min | 955 km/h |
| Ultra-Fast DC (350kW) | 280 kW | - | 13 min | 1783 km/h |
XPENG G6 AWD Performance Charging Costs & Energy Use
The cost of charging a XPENG G6 AWD Performance will depend on where it is being charged. The costs of charging from home versus charging as a fast public charging station vary significantly.
The cost of fully charging a XPENG G6 AWD Performance on a typical home flat energy tariff of $0.35/kWh is $28.28.
The cost of fully charging the XPENG G6 AWD Performance at a fast public station, where rates as high as $0.7/kWh will be $56.56.
Use our EV charging calculator to get a personalised estimate of the charging costs for a XPENG G6 AWD Performance
CCS CompatibleXPENG G6 AWD Performance Fast Charging & Tesla Supercharger Compatibility
The XPENG G6 AWD Performance can charge from 10–80% in approximately 12 minutes on a high-power DC charger.
While most Tesla Superchargers in Australia now support non-Tesla EVs such as the XPENG G6 AWD Performance via the CCS2 standard, always check the Tesla app for station compatibility.
Charging Specifications:
Usable Battery Capacity:
80.8 kWh
Fast Charge Power (max):
451 kW
Fast Charge Power (avg):
280 kW
Max Fast Charging Speed:
2588 km/h
Charge Port:
Type 2
Port Location:
Right Side (Rear)
XPENG G6 AWD Performance Recommended Charge Level
The XPENG G6 AWD Performance uses an LFP battery. The typical recommended charge limit is 100% for daily use.
The key advantage of LFP is the freedom to fully charge the pack to 100% every time with substantially less degradation concerns compared to other chemistries.
Check your owners manual for specific recommendations for the XPENG G6 AWD Performance.
XPENG G6 AWD Performance Bidirectional Charging (V2G/V2H/V2L)
The XPENG G6 AWD Performance currently supports bidirectional charging features such as Vehicle-to-Load (V2L).
| Feature | Supported | Max Power Output |
|---|---|---|
| Vehicle-to-Grid (V2G) | No | - |
| Vehicle-to-Home (V2H) | No | - |
| Vehicle-to-Load (V2L) | Yes | 3.3 kW |