Leapmotor C10 Style BEV Charging Guide: Time, Speed, Power
Price: $45,888
Available since 2026
Key EV Specs
72kWh
Battery Size (capacity)
425 km
Range (WLTP)
164 Wh/km
Efficiency
7.3 s
Acceleration (0-100 km/hr)
11 kW AC / 84 kW DC
Charge Power (max)
Leapmotor C10 Style BEV Charging Overview and Charging Specs
The Leapmotor C10 Style BEV is equipped with a 72 kWh battery and supports both AC and DC charging. With the right setup, you can charge conveniently at home or use public charging stations for faster top-ups. This guide covers charging times, costs, plug types, and tips to maximise efficiency. The C10 Style BEV uses a Type 2 plug for AC charging and a CCS connector for DC fast charging, both standard in Australia.
| Battery size (capacity) | 72 kWh |
| Battery Size (useable) | 69.9 kWh |
| Battery Chemistry | LFP |
| Charge Port Type | Type 2 |
| Charge Port Location | Left Side - Rear |
| Charge Power (max) | 11 kW |
| Charge Speed | 60 km/h |
| Charge Time (0-100%) | 7 hrs 6 mins |
Leapmotor C10 Style BEV Charging Times and Speeds
The Leapmotor C10 Style BEV has a charging limit of 11 kW AC. This means that a three-phase 22kW AC charger will only supply power at 11 kW AC. If you are using a 7.2 kW AC charger, power will be limited to 7.2 kW AC. The table below provides charging times across different charger types.
Use our EV charging calculator if you want to customise your charge level and speed.
Charging Station Comparison
| Charger Type | Power Output (Average) | 0–100% Time | 10–80% Time | Speed |
|---|---|---|---|---|
| Home AC (7kW) | 7 kW | 10.5 hr | - | 43 km/h |
| Public AC (22kW) | 11 kW | 6.7 hr | - | 67 km/h |
| DC Fast (50kW) | 50 kW | - | 62 min | 305 km/h |
| DC Fast (150kW) | 70 kW | - | 44 min | 427 km/h |
| Ultra-Fast DC (350kW) | 70 kW | - | 44 min | 427 km/h |
Leapmotor C10 Style BEV Charging Costs & Energy Use
The cost of charging a Leapmotor C10 Style BEV will depend on where it is being charged. The costs of charging from home versus charging as a fast public charging station vary significantly.
The cost of fully charging a Leapmotor C10 Style BEV on a typical home flat energy tariff of $0.35/kWh is $25.20.
The cost of fully charging the Leapmotor C10 Style BEV at a fast public station, where rates as high as $0.7/kWh will be $50.40.
Use our EV charging calculator to get a personalised estimate of the charging costs for a Leapmotor C10 Style BEV
CCS CompatibleLeapmotor C10 Style BEV Fast Charging & Tesla Supercharger Compatibility
The Leapmotor C10 Style BEV can charge from 10–80% in approximately 42 minutes on a high-power DC charger.
While most Tesla Superchargers in Australia now support non-Tesla EVs such as the Leapmotor C10 Style BEV via the CCS2 standard, always check the Tesla app for station compatibility.
Charging Specifications:
Usable Battery Capacity:
72 kWh
Fast Charge Power (max):
84 kW
Fast Charge Power (avg):
70 kW
Max Fast Charging Speed:
460 km/h
Charge Port:
Type 2
Port Location:
Left Side (Rear)
Leapmotor C10 Style BEV Recommended Charge Level
The Leapmotor C10 Style BEV uses an LFP battery. The typical recommended charge limit is 100% for daily use.
The key advantage of LFP is the freedom to fully charge the pack to 100% every time with substantially less degradation concerns compared to other chemistries.
Check your owners manual for specific recommendations for the Leapmotor C10 Style BEV.
Leapmotor C10 Style BEV Bidirectional Charging (V2G/V2H/V2L)
The Leapmotor C10 Style BEV currently supports bidirectional charging features such as Vehicle-to-Load (V2L).
| Feature | Supported | Max Power Output |
|---|---|---|
| Vehicle-to-Grid (V2G) | No | - |
| Vehicle-to-Home (V2H) | No | - |
| Vehicle-to-Load (V2L) | Yes | 3.3 kW |