BYD Seal Dynamic Charging Guide: Time, Speed, Power
Price: $46,990
Available since 2023
Key EV Specs
64kWh
Battery Size (capacity)
460 km
Range (WLTP)
134 Wh/km
Efficiency
7.5 s
Acceleration (0-100 km/hr)
7 kW AC / 110 kW DC
Charge Power (max)
BYD Seal Dynamic Charging Overview and Charging Specs
The BYD Seal Dynamic is equipped with a 64 kWh battery and supports both AC and DC charging. With the right setup, you can charge conveniently at home or use public charging stations for faster top-ups. This guide covers charging times, costs, plug types, and tips to maximise efficiency. The Seal Dynamic uses a Type 2 plug for AC charging and a CCS connector for DC fast charging, both standard in Australia.
| Battery size (capacity) | 64 kWh |
| Battery Size (useable) | 61.44 kWh |
| Battery Chemistry | LFP |
| Charge Port Type | Type 2 |
| Charge Port Location | Right Side - Rear |
| Charge Power (max) | 7 kW |
| Charge Speed | - |
| Charge Time (0-100%) | 9 hrs |
BYD Seal Dynamic Charging Times and Speeds
The BYD Seal Dynamic has a charging limit of 7 kW AC. This means that a three-phase 22kW AC charger will only supply power at 7 kW AC. If you are using a 7.2 kW AC charger, power will be limited to 7.2 kW AC. The table below provides charging times across different charger types.
Use our EV charging calculator if you want to customise your charge level and speed.
Charging Station Comparison
| Charger Type | Power Output (Average) | 0–100% Time | 10–80% Time | Speed |
|---|---|---|---|---|
| Home AC (7kW) | 7 kW | 9.6 hr | - | 52 km/h |
| Public AC (22kW) | 7 kW | 9.6 hr | - | 52 km/h |
| DC Fast (50kW) | 50 kW | - | 57 min | 373 km/h |
| DC Fast (150kW) | 76 kW | - | 37 min | 567 km/h |
| Ultra-Fast DC (350kW) | 76 kW | - | 37 min | 567 km/h |
BYD Seal Dynamic Charging Costs & Energy Use
The cost of charging a BYD Seal Dynamic will depend on where it is being charged. The costs of charging from home versus charging as a fast public charging station vary significantly.
The cost of fully charging a BYD Seal Dynamic on a typical home flat energy tariff of $0.35/kWh is $22.40.
The cost of fully charging the BYD Seal Dynamic at a fast public station, where rates as high as $0.7/kWh will be $44.80.
Use our EV charging calculator to get a personalised estimate of the charging costs for a BYD Seal Dynamic
CCS CompatibleWhile most Tesla Superchargers in Australia now support non-Tesla EVs such as the BYD Seal Dynamic via the CCS2 standard, always check the Tesla app for station compatibility.
BYD Seal Dynamic Fast Charging & Tesla Supercharger Compatibility
The BYD Seal Dynamic can charge from 10–80% in approximately 34 minutes on a high-power DC charger.
While most Tesla Superchargers in Australia now support non-Tesla EVs such as the BYD Seal Dynamic via the CCS2 standard, always check the Tesla app for station compatibility.
Charging Specifications:
Usable Battery Capacity:
64 kWh
Fast Charge Power (max):
110 kW
Fast Charge Power (avg):
76 kW
Max Fast Charging Speed:
741 km/h
Charge Port:
Type 2
Port Location:
Right Side (Rear)
BYD Seal Dynamic Recommended Charge Level
The BYD Seal Dynamic uses an LFP battery. The typical recommended charge limit is 100% for daily use.
The key advantage of LFP is the freedom to fully charge the pack to 100% every time with substantially less degradation concerns compared to other chemistries.
Check your owners manual for specific recommendations for the BYD Seal Dynamic.
BYD Seal Dynamic Bidirectional Charging (V2G/V2H/V2L)
The BYD Seal Dynamic currently supports bidirectional charging features such as Vehicle-to-Load (V2L).
| Feature | Supported | Max Power Output |
|---|---|---|
| Vehicle-to-Grid (V2G) | No | - |
| Vehicle-to-Home (V2H) | No | 3.3 |
| Vehicle-to-Load (V2L) | Yes | 3.3 kW |