Leapmotor B05 Premium Charging Guide: Time, Speed, Power
Price: $35,888
Available since 2026
Key EV Specs
56.2kWh
Battery Size (capacity)
401 km
Range (WLTP)
137 Wh/km
Efficiency
7.5 s
Acceleration (0-100 km/hr)
11 kW AC / 174 kW DC
Charge Power (max)
Leapmotor B05 Premium Charging Overview and Charging Specs
The Leapmotor B05 Premium is equipped with a 56.2 kWh battery and supports both AC and DC charging. With the right setup, you can charge conveniently at home or use public charging stations for faster top-ups. This guide covers charging times, costs, plug types, and tips to maximise efficiency. The B05 Premium uses a Type 2 plug for AC charging and a CCS connector for DC fast charging, both standard in Australia.
| Battery size (capacity) | 56.2 kWh |
| Battery Size (useable) | 55 kWh |
| Battery Chemistry | LFP |
| Charge Port Type | Type 2 |
| Charge Port Location | Right Side - Rear |
| Charge Power (max) | 11 kW |
| Charge Speed | 72 km/h |
| Charge Time (0-100%) | 5 hrs 36 mins |
Leapmotor B05 Premium Charging Times and Speeds
The Leapmotor B05 Premium has a charging limit of 11 kW AC. This means that a three-phase 22kW AC charger will only supply power at 11 kW AC. If you are using a 7.2 kW AC charger, power will be limited to 7.2 kW AC. The table below provides charging times across different charger types.
Use our EV charging calculator if you want to customise your charge level and speed.
Charging Station Comparison
| Charger Type | Power Output (Average) | 0–100% Time | 10–80% Time | Speed |
|---|---|---|---|---|
| Home AC (7kW) | 7 kW | 8.3 hr | - | 51 km/h |
| Public AC (22kW) | 11 kW | 5.3 hr | - | 80 km/h |
| DC Fast (50kW) | 50 kW | - | 49 min | 365 km/h |
| DC Fast (150kW) | 103 kW | - | 24 min | 752 km/h |
| Ultra-Fast DC (350kW) | 103 kW | - | 24 min | 752 km/h |
Leapmotor B05 Premium Charging Costs & Energy Use
The cost of charging a Leapmotor B05 Premium will depend on where it is being charged. The costs of charging from home versus charging as a fast public charging station vary significantly.
The cost of fully charging a Leapmotor B05 Premium on a typical home flat energy tariff of $0.35/kWh is $19.67.
The cost of fully charging the Leapmotor B05 Premium at a fast public station, where rates as high as $0.7/kWh will be $39.34.
Use our EV charging calculator to get a personalised estimate of the charging costs for a Leapmotor B05 Premium
CCS CompatibleLeapmotor B05 Premium Fast Charging & Tesla Supercharger Compatibility
The Leapmotor B05 Premium can charge from 10–80% in approximately 22 minutes on a high-power DC charger.
While most Tesla Superchargers in Australia now support non-Tesla EVs such as the Leapmotor B05 Premium via the CCS2 standard, always check the Tesla app for station compatibility.
Charging Specifications:
Usable Battery Capacity:
56.2 kWh
Fast Charge Power (max):
174 kW
Fast Charge Power (avg):
103 kW
Max Fast Charging Speed:
1142 km/h
Charge Port:
Type 2
Port Location:
Right Side (Rear)
Leapmotor B05 Premium Recommended Charge Level
The Leapmotor B05 Premium uses an LFP battery. The typical recommended charge limit is 100% for daily use.
The key advantage of LFP is the freedom to fully charge the pack to 100% every time with substantially less degradation concerns compared to other chemistries.
Check your owners manual for specific recommendations for the Leapmotor B05 Premium.
Leapmotor B05 Premium Bidirectional Charging (V2G/V2H/V2L)
The Leapmotor B05 Premium currently supports bidirectional charging features such as Vehicle-to-Load (V2L).
| Feature | Supported | Max Power Output |
|---|---|---|
| Vehicle-to-Grid (V2G) | No | - |
| Vehicle-to-Home (V2H) | No | - |
| Vehicle-to-Load (V2L) | Yes | 3.3 kW |